ASK ABOUT
YOUR PRODUCT.

No. Keramik supplies trade partners only: PPF studios, detailers, dealerships, dealers, distributors and importers.

Keramik is a brand by All Car Products, based in India.

Cloud Foam Shampoo, Stain X, Glass Clear X, Matt Shine Rubber, Black Trim Dye, Interior Cockpit, Interior Shampoo, GLUE X, PPF X and Keramik 9H Nano.

Most products come in 5 litre workshop packs. GLUE X and PPF X also come in 500 ml. Black Trim Dye is a 250 ml pack and Keramik 9H Nano is a 50 ml kit.

Use the Get Trade Price form or the dealer page. Share your business name, city and the products you want to stock.

Yes. Importers and distributors can send an export enquiry with their country and expected volume and we will reply with pricing and terms.

Use the Get Trade Price form, WhatsApp us on +91 87585 99069 or email allcarproductsindia@gmail.com.

We reply to trade and export enquiries within one working day.

A thick, creamy foam that lifts dirt off the paint so your mitt glides over the surface instead of dragging grit across it.

• Thick, clingy foam. Covers the whole car and loosens dust, road dirt and traffic film before you ever touch the paint.
• Slick and gentle. The foam makes the surface slippery, so every wipe is smoother and safer for the paint.
• Works with any wash setup. Use it in a foam cannon, a pressure washer or a simple bucket. One product for every bay.
• Rinses off easily. A balanced formula that is gentle enough for everyday washing.

1. Rinse the car well to wash away loose dirt.
2. Mix as per the guide and apply the foam from the bottom panels upward.
3. Let it sit for 2 to 4 minutes. Do not let it dry. Then rinse with clean water.
4. For a contact wash, use a clean microfiber mitt from top to bottom and rinse the mitt often.
5. Rinse the car fully and dry with a clean microfiber towel.

Mixing guide. Foam cannon: 1 part product to 9 parts water. Bucket wash: 30 to 50 ml in 10 litres of water. Adjust a little for your equipment, water and how thick you like the foam.

Pro tip. Wash in the shade on a cool surface. If the car is very dirty, pre wash it first and then do the contact wash.

Cloud Foam Shampoo comes as a 5 L pack.

Keep out of reach of children. Avoid contact with eyes. Do not swallow. Store in a cool, dry place away from direct sunlight.

A strong cleaner that brings dull wheels and chrome back to their original shine, even where brake dust has been baked on.

• Brake dust. Breaks down the dark, sticky dust that builds up on wheels every day.
• Rust and oxidation stains. Helps lift orange rust marks and dull patches from alloys and chrome.
• Carbon and water spots. Clears carbon deposits and hard water marks that normal shampoo leaves behind.
• Brighter alloys and chrome. Wheels look cleaner, sharper and closer to new.

1. Make sure the wheel is cool and rinse off any loose dirt.
2. Spray Stain X evenly on the area, or on a brush or applicator.
3. Let it work for a short while. Do not let it dry. Then scrub gently with a brush or microfiber.
4. Rinse well with clean water and wipe dry. Repeat for heavy stains.

Pro tip. For very dirty wheels, use a detailing brush for a deeper clean. Never let the product dry on the surface, and always test on a small hidden spot first.

Stain X comes as a 5 L pack.

Wear gloves. Avoid contact with eyes and skin. Do not use on hot surfaces. Keep out of reach of children.

Crystal clear glass with no streaks and no haze. Safe for windscreens, windows, mirrors and tinted glass.

• No streaks, clear view. Dries to a clean, sharp finish so you can see through the glass without distortion.
• Cuts through oily smudges. Removes road film, fingerprints and greasy marks in a single pass.
• Dries quickly. Evaporates fast, which means less rubbing and less chance of streaks.
• Safe on tint. Gentle on tinted glass and window films when used as directed.

1. Make sure the glass is cool and out of direct sun.
2. Spray a little on the glass, or on a glass cloth.
3. Wipe in straight lines, either side to side or up and down.
4. Flip to a dry side, or use a second dry towel, and buff until the glass is clear.

Pro tip. Use two towels. Wipe side to side on the inside and up and down on the outside. If a faint line is left, you will know straight away which side it is on.

Glass Clear X comes as a 5 L pack.

Keep out of reach of children. Avoid contact with eyes. Do not swallow. Use in a ventilated area.

A clean, rich matt to satin finish for tyres and rubber. Never too glossy and never greasy.

• Natural matt look. Gives tyres a deep, dark finish that looks like new, not wet and oily.
• Does not turn sticky. Dries well on the surface, so it stays off your hands, clothes and the paint.
• Lasts. Keeps tyres looking good between washes.
• Easy, even coverage. Spreads smoothly with a pad, so there are no patches or streaks.

1. Clean and dry the tyre fully. Shake the bottle well.
2. Spray the product on a clean tyre applicator pad.
3. Spread it evenly over the sidewall with smooth, overlapping strokes.
4. Let it settle in, then wipe off any extra. Add a second coat for a deeper finish.

Pro tip. Start with a clean, dry tyre. Do not use too much product, and wipe any overspray off the wheels and nearby panels.

Matt Shine Rubber comes as a 5 L pack.

Keep out of reach of children. Avoid contact with eyes. Do not swallow. Store away from heat.

Brings faded, grey plastic trims back to a deep, even black.

• Faded outside trims. Made for bumpers, cladding, mirror housings and other unpainted black plastic.
• Deep, even black. Brings back the rich colour on sun faded and chalky trim.
• Easy tube format. Apply it from the tube on to an applicator, so you can control exactly where it goes.

1. Clean the trim well and let it dry fully.
2. Mask the paint next to the trim to keep it neat.
3. Apply a small amount on a clean applicator and spread it evenly.
4. Wipe off any extra and let it settle before touching.

Pro tip. Test on a small hidden area first, and wear gloves while you work.

Black Trim Dye comes as a 250 ml tube.

Wear gloves. Avoid contact with eyes and skin. Keep out of reach of children.

Cleans and protects the dashboard and interior panels, and leaves a soft factory matte look with nothing sticky behind.

• Not sticky. Dries to a clean, dry feel. No greasy shine and no fingerprints.
• Natural factory matte. Gives dashboards and trims the original, even look.
• Helps against sun fade. Protects interior surfaces from fading and ageing from the sun.
• Pleasant fresh scent. A light, premium smell that makes the cabin feel clean.

1. Make sure the surface is cool and free of loose dust.
2. Spray on a clean, dry microfiber towel or applicator pad. Do not spray on screens or the instrument cluster.
3. Rub it evenly over the dashboard and trims.
4. Flip to a dry side and buff lightly for an even matte finish.

Pro tip. Always apply with a towel or pad, not straight on to upright panels. This stops overspray on the windscreen and touchscreens.

Interior Cockpit comes as a 5 L pack.

Keep out of reach of children. Avoid contact with eyes. Do not swallow.

One cleaner for the whole interior. Use it on dashboards, door panels, consoles, trims and fabric.

• Many interior surfaces. One bottle handles plastic, trim, fabric and more, so your shelf stays simple.
• Dirt, stains and grime. Lifts everyday marks, spills and built up dirt.
• Choose your strength. Mix it lighter for regular cleaning or stronger for heavy jobs.
• Quick and easy. Acts fast and is simple to apply with a cloth or brush.

1. Vacuum the interior well first.
2. Mix as needed and spray on a cloth or brush, or on the surface where suitable.
3. Rub gently with a detailing brush or microfiber.
4. Wipe away the loosened dirt with a clean microfiber towel.

Mixing guide. Regular cleaning: 1 part product to 10 parts water. Heavy cleaning: 2 parts product to 10 parts water.

Interior Shampoo comes as a 5 L pack.

Keep out of reach of children. Avoid contact with eyes. Test on a hidden spot first.

A fast acting formula that softens hardened glue quickly and leaves the clear coat untouched. Remove the glue. Keep the paint perfect.

• PPF glue left behind. Dissolves the stubborn adhesive that stays on the paint after the film is removed.
• Wraps, stickers and decals. Cleans residue from vinyl wraps, stickers, decals and masking tapes.
• Safe for clear coat. Leaves a clean, residue free surface without harming the paint.
• Prep before polishing and coating. The step you need before paint correction, coating or a new wrap.

1. Make sure the panel is cool and free of loose grit.
2. Spray GLUE X directly on the glue.
3. Wait 2 to 3 minutes for the glue to soften.
4. Rub and lift the glue with a clean microfiber or a 3 inch wool pad.
5. For thick, layered glue, spray again and repeat.
6. Wipe the panel clean and check that it no longer feels tacky before you polish or coat.

Pro tip. Roll the softened glue away with a microfiber folded in quarters. Turn to a fresh side often, so you lift the glue off instead of smearing it around.

GLUE X removes leftover adhesive residue after film removal. PPF X softens the adhesive bond so old TPU, TPH and PVC films come off with less scraping.

GLUE X comes as a 5 L and 500 ml.

Wear gloves. Avoid contact with eyes, skin and clothing. Use in a well ventilated area. Do not swallow. Keep out of reach of children.

A thick formula made to safely remove old, damaged or badly fitted paint protection film, with far less scraping than heat or steam.

• Removes old and failed film. Great for cracked, yellowed or low quality TPU, TPH and PVC film.
• Stays on upright panels. Thick, non dripping formula that clings to doors and pillars so it keeps working.
• Softens glue, not paint. Works on the adhesive layer and is made not to harm the paint.
• Less scraping, less work. Saves a lot of time and labour compared with heat and steam.

1. Wash and dry the car.
2. Mask nearby trims, rubber and headlights with tape.
3. Apply an even, generous layer of PPF X over the film.
4. Cover the area with a plastic sheet to keep it wet and help it soak in.
5. Wait 10 to 20 minutes, depending on how old and thick the film is.
6. Lift one edge with a plastic tool and peel back slowly. Add more product on stubborn seams.
7. Clean off the leftover glue with GLUE X before polishing or fitting new film.

Pro tip. Always cover the panel with a plastic sheet while it waits. It stops the product drying out and helps the film come off in one clean piece.

PPF X softens the adhesive bond so old TPU, TPH and PVC films come off with less scraping. GLUE X then removes leftover adhesive residue.

PPF X comes as a 5 L and 500 ml.

Wear gloves and eye protection. Avoid contact with eyes and skin. Use in a well ventilated area. Keep away from children.

A ceramic protection layer for car paint. It keeps the finish glossy, makes washing easier and helps the paint hold its value for longer.

• Protects the value of the car. Adds a layer that helps guard the paint against scratches, swirl marks and everyday environmental damage.
• Built to last. A 9H rated coating that stays on the paint longer, so reapplication is needed less often.
• Mirror like shine. Gives the paint a deep, glossy finish that shows off the colour.
• Water beads and rolls off. A hydrophobic finish that sheds water and dirt, so every wash gets easier.

1. Wash and dry the car fully. Work in shade on a panel that is cool to the touch.
2. Remove any glue, tar or old residue, and correct the paint if it needs it.
3. Wipe the panel with a clean cloth so it is free from oil and dust.
4. Put a few drops of Keramik 9H Nano on the applicator and spread it over a small section.
5. Let it set as per the label, then buff off with the clean microfiber cloth from the kit.
6. Keep the car dry and out of the rain for the time given on the label.

Pro tip. Work one small section at a time and turn the cloth to a clean side often. This helps you avoid streaks and high spots.

Keramik 9H Nano comes as a 50 ml kit.

Wear gloves. Avoid contact with eyes and skin. Use in a well ventilated area. Keep out of reach of children.